The NoNpDrm plugin allows y'all to install official PS Vita files forth with whatever updates or patches. For this guide, we will install NoNpDrm files on our hacked PS Vita. You lot must accept NoNpDrm installed (steps 1-three) before you can use NoPayStation or PKGj.

Files and Programs Needed

NoNpDrm.skprx: GitHub Link
VitaShell: GitHub Link
WinSCP: WinSCP Homepage
NoNPDrm File: Google or NoPayStation PSVitaMod Page
Brand sure you Enable Unsafe Homebrew in HENkaku Settings.
Once you have NoNpDrm installed (After step three), you lot can go to my other guides to install PKGj or NoPayStation.

Need More Storage?

Upgrade your Micro SD Card to store more than files. I got my Micro SD Bill of fare here.

Step 1: Prepare Connection to WinSCP.

NoNpDrmPT1

  • Turn on the Wi-Fi on the Vita and go to VitaShell.
  • Press START to bring up Principal settings and change "SELECT button" to FTP, and press O to exit.
  • If you don't accept sd2vita installed, the USB device should exist Memory Card instead.

Footstep 1.5: Gear up Connection to WinSCP.

FTP Server

  • Press SELECT to bring up your FTP server information.
  • These numbers permit WinSCP to connect to your Vita. Leave this notification on or press X.

Annotation:
If you need help installing WinSCP, then see my guide here (https://psvitamod.com/set-up-ftp-connexion/).

Step 2: Transfer NoNpDrm.skprx to Tai Binder

  • Open up WinSCP and on the login that pops up, modify File Protocol to FTP.
  • Enter the host name (appears after ftp://) and port # (last 4 digits after the colon)
  • Click Login later saving the session. Move the nonpdrm.skprx into the ur0:tai folder
  • Await till you lot get a notification that the file was transferred.

Note:
 This guide refers to the Tai folder in the ur0 directory, this is because I moved my tai folder to ur0. If your tai folder is in ux0, considered moving it to ur0:tai, change the config.txt to refer to ur0, and delete the tai binder in ux0. Otherwise, replace all instances of ur0:tai with ux0:tai.

Stride iii: Edit Config.txt file in ur0:Tai

  • Become to the config.txt file in the tai folder and open it by pressing 10.
  • Scroll downwardly to *Kernal and press Triangle to bring up a card.
  • Press "Insert empty line" and type in ur0:tai/nonpdrm.skprx
    • Make certain the ur0 is a naught and not the letter "O"
  • Press O to go back out to your config file and then O again to exit.
  • Press X to save your modifications.

Annotation:
 If you want to install downloads through PKGj instead, restart your Vita after pressing Ten to salve the modifications and and then follow my PKGj guide.

Step four: Switch to USB connection

NoNpDrmPT4

  • Press START to bring upwardly main settings and change SELECT button to USB.
  • Press SELECT to connect to your PC through USB.
  • Look for a screen to pop on your PC containing all the files on your memory bill of fare.

Step 5: Enable Hidden Folders.

Show Hidden Folders

  • You lot need to enable View Hidden folders to encounter everything in your memory card.
  • Go to View / Options /Alter folder and search options / View / and select "Show subconscious files, folders, and drives"
  • Make sure to unchecked "Hibernate protected operating system files (Recommended)".
  • Click Ok.

Step half dozen: Transfer Files to Memory Card.

Install NoNpDRm PT1.flv_000131100

  • Your downloaded files will either contain an App folder or a folder that starts with a letter of the alphabet follow by numbers.
  • In this example our file has an app folder and inside is PCSE00277.
  • You should see an app folder on your memory card folder.
  • Re-create the PCSE00277 folder and paste it into the App folder.
  • Await for the files to terminate transferring.

Step six.v: Transfer DLC, Patches, or Licences.

  • If your file contains other folders such as addcont (DLC), license, patch, app then you will need to transfer those over to the same corresponding folders on your retentiveness carte du jour.
  • If the folders are not on your retention carte, then create them.

Moving DLC

  • In the diagram above, each folder will comprise the ID (PCSA00147), except for license.
  • You demand to move each binder in the scarlet square to the same folder in your retentivity card.
  • Ex: Move the PCSA00147 folder in the app binder to the app folder in your memory bill of fare.

Step vii: Reset PS Vita.

NoNpDrmPt7

  • Dorsum on the Vita press O to cancel the USB connectedness
  • Press SELECT to bring upwardly the main settings.
  • Press Reboot on Vitashell, wait for the Vita to reset, and then launch Vitashell again.

Annotation:
 1. Every fourth dimension you add or change anything in your config.txt file you need to restart the Vita for those changes to occur.
ii. If you are using the official PlayStation Vita retentivity you need to modify your USB device to memory card. See motion picture below. (Cheers to Jazzman for pointing this out)

Memory Card

Step 8: Accept VitaShell Install the File.

REfresh LiveArea

  • Press triangle and click on Refresh LiveArea
  • Press X to go along.
  • The screen should say "Refreshed 1 items."

Note: If you are transferring multiple files, you merely need to refresh in one case. In that instance the screen should say "Refreshed 10 items" where X is the number of files yous transferred.

REfreshed 1 item

Pace viii: Go Back out to the Domicile Screen.

  • Go dorsum to the home screen and roll all the way down. There should now exist a billowy bubble.

Notes: If y'all are getting 0 items refreshed

  1. It might be the file you have. Endeavour to search for another source such as NoPayStation (https://psvitamod.com/nopaystation) or PKGj (https://psvitamod.com/pkgj).
  2. Games, DLCS, and updates go in ux0, but Nonpdrm.skprx should be in ur0:tai. Make sure in that location is no tai folder in ux0.
  3. If your folder has patches, DLC, etc., install just the App and encounter if that works.
  4. Please make certain you have nonpdrm.skprx under the *Kernal in config.txt and that yous restarted your Vita subsequently doing this.
  5. Make sure you are putting the files in the right places. Ex: Put whatever is inside the App folder of the downloaded file to the inside of the App folder in ux:0.
  6. Reload your taihen file in Henkaku settings.